Showing posts with label IHQ. Show all posts
Showing posts with label IHQ. Show all posts

Wednesday, April 24, 2013

Dansk Kobenstyle Small Baking Dish

I actually found this and photographed it back in October - yes it's been a while since I posted and I figured I'd get caught up a bit. I was walking into Goodwill and saw a woman carrying out a bright red Dansk bread pan and was hopeful there were other pieces left behind. I spotted this small baking pan on the end-cap towards the back of the kitchen aisle, otherwise it had been picked clean.


This is the smaller of the two (maybe 3?) sizes available from Dansk in the Kobenstyle pattern,  roughly 11" x 8" x 2" of baking area, featuring enamels of bright red and white and the iconic Jens Quistgaard designed handles adorning the ends.


This is certainly the best condition baking pan example I've found in the wild. Previously I found the larger pan for $2 at a Last Chance Thrift Store, however I still haven't gotten all the black gunk off of it - seems it was used more frequently than it was cleaned.


Apparently Goodwill (or at least this particular location) has learned that there is some value to these - either that or the particularly good condition inspired them to bump the price up a bit. At $8.58 it was still a bargain, but much more than, say a cheap Wilton pan used at around $3.



This example is marked Dansk International Designs LTD IHQ/France with the copyright symbol.




 I'm just enamored (sic) with the handles on the pans - much of the attraction for me are the design elements.



This pan along with siblings from the line are once again available at Macy's, Bloomingdale's and Crate and Barrel - this example would put you back about $80 but you might be able to find one on sale.

-- John

Tuesday, February 12, 2013

Dansk Teak End-Cut Coaster Set

I'm finally getting around to December and January finds - fairly "slim-pickings" from those two months or perhaps I'm just getting too choosy. In any case, I found these 8 coasters at Goodwill - they had the two rubber bands around them as shown, wrapped in plastic with a $1.92 price on them.


They looked great and even better once I got them home. I don't believe they were ever used - so these are keepers.


Dansk would normally market these in sets of 4 so I'm presuming that these 8 are actually two sets. Also, Dansk would normally mark the edge of at least one coaster with a small "Dansk" imprint - I've looked these over and couldn't find one so these are potentially knock-offs. However they are so nice it doesn't matter to me, plus they are extremely functional.




I'm particularly fond of the butcher-block end-grain cut of similar cutting boards. I find the grain patterning entrancing. Sorry about the glare on these - they aren't high-polish but due to the wood's hardness and silica content, they tend to reflect light.


More to come...

-- John

Tuesday, December 25, 2012

Large Dansk Rare Woods Tray

Recently I found what is probably the epitome of thrift scores, at least for me. With my love of modernism, wooden items, Dansk, etc., I had never hoped to find a Dansk Rare Woods item. If you're unfamiliar with the term, it seems that for a few years Dansk created items made of a list of rare woods instead of teak - I believe that this was some time in the 60's. All of these items are marked with the name of the wood and a branch from the species, in this case cocobolo (in the rosewood family) - they are also all very distinctive in appearance. I found this tray at Goodwill:

Front View from one end
I couldn't believe what I was seeing and immediately took a photo with my phone to send to my friend and fellow modern connoisseur, John Stevens. First, this thing is massive measuring in at about 15" by 30" with a slight lip and runners (total height is less than an inch). Second, considering the thinness of wood, it's very heavy.


It's got a few water rings and scratches but I believe it will clean up nicely.


Bottom View from one end
What amazes me about this is the over-all construction. First laminating individual pieces of cocobolo into a structure that would support weight using nothing but epoxy, then routing out the inside to get it this thin. All of that would be hard to do with most woods. You can see the imprint in the photo below.



It's hard to believe that this tray is still in the amazing condition that it's in - unlike many other trays I come across (and pass on) this one hasn't been put into a dishwasher (might me due to it's size).


There are a couple of edge dings, this one looks to have been struck with something as there's a shallow chip:


The second ding looks to be one from the factory (a small void where the wood had fallen out):


I think the tray will clean up fine - the scratches are all in the surface and very mild - probably from being stored with something laying on top of the tray. Some cleaning, very light sanding and a coat of Danish oil should be all it needs.

-- John

Sunday, December 2, 2012

Dansk End-Cutting Board Tray Refurb

I managed to do some light sanding on the Dansk Teak End-Grain Cutting Board/Tray that I posted previously.


This tray was mostly just a bit dirty but it did have a few imperfections - luckily they all sanded out. I always start these retorations by wiping everything down with mineral spirits. It tends to get off any goo and the sanding tends to work out any residue. After a bit of sanding at 220 I wiped well and followed with two coats of Watco Danish Oil. I love the honey-colored hues of Teak. This one will be a keeper.

-- John

Sunday, November 11, 2012

Dansk Teak Serving Tray with End-grain Cutting Board

I posted this find a few days ago on Facebook - $1.71 at Goodwill (where do they get these prices?).


Technically this is more of a platter with a cutting surface, for cheese, fruit, etc. It's about 12 inches in diameter and in very good condition (no major gouges, with a surface that's just a bit dirty).


Dansk would cut small pieces of end-grain teak to get the butcher-block effect - these were inset into a routed space then sanded flush - an interesting technique that would hold up well provided the platter wasn't left submerged in water (I've seen more than one butcher-block platter made in this manner with pieces missing from the glue-up).



As a bonus, this example was made in Denmark (rather than Malaysia or elsewhere) so the teak is probably from Northern Europe. Full Dansk and IHQ brand on the bottom.


Apparently whomever priced this at Goodwill thought the top was the bottom (usually the price is marked on the bottom of these types of items). I was surprised to find this as it was mid-day and most of the dealers had already grabbed-up anything of perceived value. I'll post a pick later after I've cleaned it up - this one is a keeper.

-- John